Product name |
Plastic Intalox Saddle |
||||
Material |
PP, PE, PVC, CPVC, PVDF, etc |
||||
Life span |
>3 years |
||||
Size mm |
Drip several |
Void volume % |
Packing number pieces/m3 |
Packing density Kg/m3 |
Dry packing factorm-1 |
82.5*95 |
388 |
96.3 |
1165 |
33.7 |
23 |
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
||||
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°. |
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
Operation temp.(℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
Chemical corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
Compression strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |