Products
-
Plastic Random Packing Heilex Ring
Plastic Heilex Ring is a new type of injection molding of the filler hole, it was first being developed in foreign countries. Later, China’s such a filler were studied, and the successful development of China-made Heilex ring packing. Plastic Heilex Ring shape so that it not only has the flux, and pressure reduction and anti-corrosion resistance and good impact performance, but also has a filler would not nested, the wall flow effect of the small and the advantages of gas-liquid distribution. This applies to gas absorption packing, cooling and gas purification processes. It is a new kind of open-celled packing. Heilex ring has unique configuration, and usually made by PP injection. Plastic heilex ring enlarges its surface area and void space which contribute a lot to enhance the product performance. We can provide heilex rings in a variety of plastic, such as PP, RPP, PE, PVC, CPVC, PVDF etc.
-
Plastic Tri-Pak ball packing for water treatment
Zhongtai Tri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.
-
Plastic Polyhedral Hollow Ball for water treatmenet
Polyhedral Hollow Ball packing is made from heat resistant and chemical corrosion resistant plastics, and the application temperature in media ranges from 60 to 150 degrees.
Plastic Polyhedral Hollow Ball (PP, PE, PVC, CPVC, RPP ) is also called plastic multi-aspect hollow ball, polyhedral hollow ball packing composed of two hemispheres which will form into a ball. And each hemisphere consists of a number of half fan-shaped leaves, the upper and lower leaves in a staggered arrangement. The design concept is advanced and the structure is reasonable. Plastic Polyhedral hollow balls have the virtue of light weight, wide free space, small wind resistance, and good surface hydrophilic, big full wet surface area and convenient filling in the equipment and sound usage effect.
-
Plastic Hollow Floating Ball For Sewage Treatment
Plastic Hollow Floating Ball help control heat loss, evaporation, and help with odor and mist control. Hollow Balls are also used as a check-valve ball in flow control applications.
Plastic Hollow Floating Ball is made from heat resistant and chemical corrosion resistant plastics. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 150. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.
-
Plastic Liquid covering ball for Water Treatment
Plastic Liquid-surface covering ball is characteristic of stable barycenter, super position side by side, and excellent covering performance. This product is widely used in coagulate water tank and salt eliminating water tank in water treatment.
Ways of using:Put in a certain quantity of the as per the surface area of the water or liquids surface area, and the balls will set out and distribute themselves in an orderly way, and covers the surface area, and seal the fringe with sealing material.
-
Plastic Beta Ring Tower Packing
Plastic Beta Ring is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280℃. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.
-
Plastic Ralu Ring Tower Packing
Plastic Ralu Ring is an improved pall ring, their open structure ensures a regular flow through the packed bed resulting in a minimal pressure drop.
Plastic ralu rings are made of heat resistant and chemical corrosion resistant plastics including PP, PE, RPP, PVC, CPVC and PVDF.
Plastic Ralu Rings are featured with high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60°C to 280°C.
Plastic ralu ring is widely apply in all kinds of separation, absorption and desorption device, atmospheric and vacuum distillation device, decarburization and desulfurization system, ethylbenzene, iso-octane and toluene separation.
-
Plastic VSP Ring Chemical Packing
The characteristics of plastic VSP-pack ring have large void rate, low pressure drop and low height of mass transfer unit, high extensive point, full contact of gas and liquid, low specific weight and high mass transfer efficiency. It is widely used in the packing towers, petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection and etc.
VSP plastic Inner Arc packing: VSP ring also named Mella ring, VSP ring means very special packing in foreign country meaning very excellent packing. It has many advantages such as low pressure drop, large throughout, high efficiency, high operating elasticity, perfect strength.
VSP Ring has rational symmetry, excellent inner structure and large free space. Compared with Pall ring, its flux effiency is increase 15-30%, its pressure drop is reduce 20-30%. it is recognized the excellent random packing in tower packing.
-
Plastic Cascade Mini Ring Chemical Packing
Plastic Cascade Mini Ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF).
Plastic Cascade Mini Ring:
It was developed by British Company MTL Ltd, which also called CMR. It has not only change traditonal equal length and diameter, but also cone-shaped flanging at one edge. This special structure has shorten distance which gas passing through wall’s out surface, but also reduced the resistance when air passing through bed layer and increased voidage. -
Plastic Pentagon Ring tower packing
Plastic pentagon packing is an excellent packing. Based on this product’s structure analysis, funnelled hollow out design speeds up liquid’s velocity so as to improve Gas & liquid separation efficiency. Ring wall’s large area opening hole overcomes big area blocking. Five pieces of horizontal bar which bend toward the centers forms more bigger surface for gas & liquid’s contacting. More obviously feature is five pieces of down warded rods evenly distribution. This distribution will promote liquid drop to form big droplet. Finally, it is recognized high efficiency random packing used in separation.
-
High Performance Tower Packing Plastic Hiflow Ring
Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size’s pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
-
Plastic Super Raschig Ring tower packing
Plastic super raschig ring is one kind of random packing design by Zhongtai’S research and development team, it with large surface area, and high free volume, low pressure drop, low mass-transfer unit height, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on. It’s the development packing design based on plastic raschig ring and pall ring.